NMEA

Bow thrusters

Stern thrusters

Control panels

Spurs Marine Manufacturing, Inc.

"The Line and Net Cutter System"

INSTALLED ON: USCG, US Navy, Canadian CG, RNLI (English CG) and thousands of pleasure and commercial vessels worldwide..

Product brochure

Astel Marine d.o.o.

Click logo for more...

"Wireless Yacht Control System"

When landing becomes a pleasure...

The 3271 is a capacitive fuel level sender that provides a 1% accurate fuel level to the on board NMEA2000® data network every 2.5 seconds. It utilizes a powerful micro processor to not only measure the fuel level but to monitor the fuel for any water contamination. If it finds water in the fuel it indicates this by alternately transmitting tank empty followed by tank full messages thus drawing attention to the contaminated tank on the relevant network display.

The fuel level sender is robustly constructed in A316 stainless steel to the IEC60945 Maritime Navigational and Radio communications Equipment Standard to ensure high reliability and trouble free operation for many years. It is easily fitted in tank depths from 250mm to 2 Meters using the industry standard SAE 5 bolt fixing. It is silent in operation and has no moving parts.

It is certified to the NMEA2000® network standard and attaches to the network using a single Micro plug. It draws less than 50mA from the network.

It comes complete with a full installation and operation manual, tank gasket and combined power and signal cable. It takes power from the NMEA2000® bus and therefore requires no additional wiring.

Product brochure

The 3125 NMEA2000® Tank Sender Adaptor allows a standard resistive tank level sender to connect to the NMEA2000® network.

It is compatible with both European standard 0-180 Ohm and United States standard 240-30 Ohm tank level senders and is accurate to ±1%.

It is easily configurable to resistive senders from Fuel, Freshwater, Wastewater, Live Well, Oil and Black water (Sewage) tanks linking them to the NMEA2000® network. It supports up to 16 tanks of each type on a single network.

The Tank Sender Adaptor is robustly constructed to the IEC60945 Maritime Navigational and Radio communications Equipment Standard to ensure high reliability and trouble free operation for many years.

It is certified to the NMEA2000® network standard and attaches to the network using a single “Micro” plug. It draws less than 50mA from the network.

It comes complete with a full installation and operation instructions and combined power and signal cable. It takes power from the NMEA2000® bus and therefore requires no additional power wiring.

Product brochure

Deck Filler Gauge

Displays Tank Level at the Deck Filler and at the existing instruments
Prevents fuel spills during refueling
Maximizes range from full tanks
Identifies correct tank to fill
Blue LED Display
Robust Stainless Steel Construction
Easy to Install
Single Plug to NMEA2000® Bus

The 3210-F NMEA2000® Deck Filler Gauge displays the fuel level right at the fuel tank's deck filler. This enables the user to see the exact tank level at the point of fuelling. This allows the tanks to be filled to the top without the risk of spills thus maximizing the boats range.

The 3210-W NMEA2000® Water Deck Filler Gauge displays the freshwater level right at the water tank's deck filler. This enables the user to see the exact tank level at the point of filling to avoid wasting water which can be expensive in some ports.

The tank level is displayed on a blue LED display set into the deck filler surround. This provides a clear indication of the level of the liquid in the tank at all times. The LED varies in brightness to compensate for ambient light levels, brighter in sunlight and dimmer at night.

The deck filler cap has a recess for a standard opening key with a heavy duty O ring seal to keep water out of the tank. The deck filler surround and cap are mirror polished stainless steel to provide a rugged and attractive finish.

It is robustly constructed to the IEC60945 Maritime Navigational and Radio communications Equipment Standard to ensure high reliability and trouble free operation for many years.

It is certified to the NMEA2000® network standard and attaches to the network using a single plug. No other wiring is required.

Product brochure

Deck Filler Diagram

Click to enlarge picture.

Illustration of NMEA2000 network with interface to RS232 and NMEA0183 compatible equipment.

Click to enlarge picture.

All date available in NEA2000 network can be displayed also on new generation chartplotters/radars screens made by Raymarine, Simrad, Garmin, Northstar, Furuno and many other that support NEA2000 communication!